4250T

TRAIL BEHIND MODEL

The tractor assisted Bale Baron 4250T trail behind model is the original concept and has remained a popular choice as a one pass system especially suited to smaller acreages. This unit is conveniently towed directly behind the baler and utilizes an articulated chute to guide bales directly off your existing baler. The unit is powered by either the remote hydraulics on the tractor or by an optional power unit.

Features

ISOBUS Connectivity

The Bale Baron 4250 Series is now fully ISOBUS compatible, giving the operator full control and visibility over the bundling process, right from the cab. Watch each bundle build as every bale is tracked and counted - both in auto and manual modes - for accuracy every time. The Bale Baron will work with and without ISOBUS. If your tractor does not have an ISOBUS display, an optional display is available. The Bale Baron will also work without ISOBUS using the standard in-cab control.

Greaseless Nitrided Pins and Composite Bushings

To improve reliability and to help make servicing a Bale Baron easier, all pivot points now use greaseless and nitride treated pins as well as composite bushings.

Wider Stance

To improve the stability of the Bale Baron, the wheel base has been widened.

Hydraulic Valve Block with ReGen Valve

The RegenValve is a TURBO for your hydraulics. By way of the plunger circuit the RegenValve increases the speed of the plunger.

Large Twine Cabinets

Storage for 16 balls of twine means you can bale more than 5000 small square bales before needing to refill the cabinets. Plastic twine is one of the most efficient binding options available. Plastic twine is easy to buy, cost effective and user friendly for producer and end user.

Rasspe Knotter

The Bale Baron uses the proven low maintenance Rasspe knotter for reliability and easy serviceability. Sealed knotter components keep dirt out and grease in, requiring grease only once a year. Missed ties have an audible alarm.

Spring Assist Roller Ramp

Once tied, each bundle exits the Bale Baron down the roller ramp and gently onto the ground. The roller ramp is equipped with a compression spring to assist the operator when pinning up the ramp. Add a roller chute extension for stationary baling.

Turn Table

The aggressive traction of the Bale Barons perforated turn-table grabs the bales as they exit the baler giving excellent side hill performance.

Dual Caster Wheels

Two dual heavy-duty front caster wheels for increased stability and flotation. Hollow rubber block suspension on casters for smooth trailing.

Smart Solve

The Smart/Solve system runs using a PLC that constantly monitors and warns the operator when needed. Smart/Solve provides user friendly command and alarm messages for the operator.

Air and Hydraulic Brakes

In Europe, all 4250 and 5250 models come standard with your choice of air or hydraulic brakes. A manual parking brake is also included. Not available with tandem rear axle.

Options

3 Point Hitch Mounted PTO Power Unit

The 3 Point Hitch Mounted PTO Power Unit is designed to be used in conjunction with a baler and trailed Bale Baron. This unit allows older tractors to be used to run the Bale Baron that may not have the hydraulic capacity but have the horsepower to do the job.

Diesel Hydraulic Power Unit

74 h.p Kubota turbo diesel c/w 30g.p.m. Hydraulic, torque limiting, load sensing pump. Rotary screen pre-cleaner keeps radiator clear of chaff. No hydraulic remotes required for 4240T, 2 set of hydraulic remotes required for 4240P.

Telescoping Endgates

This kit allows you to choose the standard 21Pack, 18Pack or 9Pack bundle. The kit consists of telescoping endgates which change from 21Pack to 18Pack or 9Pack with the pull of a pin. Hydraulic expeller rollers are needed to move the 9Pack onto the roller ramp and are recommended for the 18Pack bundle.

Wide Euro Style Tires

Optional 19/45-17 10 ply tires are available on the rear axle. These wider tires offer increased traction and better flotation in muck soil or wet conditions.

Hydraulic Tongue

For narrow roadways, the hydraulic tongue positions the Bale Baron inline with the tractor and baler. The tongue mechanically unlocks and automatically locks to prevent movement both in road mode and field mode. *EU models only.

Specifications

Scroll / swipe to see full table.

MODEL
Isobus Compatible	Standard
Greaseless Pins & Composite Bushings	Standard
Trails Behind Baler	Optional Receiving Platform Req'd
Surge Brakes	N/A in Europe
Air Brakes	In Europe, choose standard Air or Hydraulic Brakes
Hydraulic Brakes	In Europe, choose standard Air or Hydraulic Brakes
Bale Size: 14"x18" Bale - 21 Bale Bundle 16"x18" Bale - 18 Bale Bundle	Standard
Closed Center Hydraulic System	Standard
Load Sensing System	Optional
Hydraulic Oil Cooler	Standard with Power Units, otherwise N/A
Open Center Hydraulic System	Optional
Horsepower Minimum	100 hp minimum
Hydraulic Flow Minimum	80 lpm
Hydraulic Flow Recommended	95 - 113 lpm
Max Permissible Hydraulic Flow	113 lpm
Power Beyond with Load Sensing	Required on tractor
Remote SCV Required	0 sets
Diesel Powered Hydraulic Power Unit	N/A
30 gpm PTO Powered Unit	N/A
40 gpm PTO Powered Unit	N/A
3PH mounted 30 gpm PTO Power Unit	Optional
3PH mounted 40 gpm PTO Power Unit	N/A
Base Weight	4850 kg
Weight with Engine Power Unit	N/A
Weight with PTO Pump Kit	N/A
Capacity	400 / hr @ 20 gpm (80 lpm) 600 / hr @ 25 gpm (95 lpm) 800 / hr @ 30 gpm (113 lpm)
Overall Length	770 cm
Wheelbase Length	318 cm
Rear Tandem Axle
Front Offset Swivel
Width with 15" Standard Tires	250 cm
Width with 19" Wide Flotation Tires	264 cm
Height (railings Collapsed)	323 cm
Height (Railings Raised)	343 cm

Ready to Know More?

Name *

Email *

Phone *

Country *

Province/State/Region *

Comment/Question *