TRAIL BEHIND Model

The tractor assisted Bale Baron 5250T is the all new, redesigned trail behind model.  Now standard with full ISOBUS connectivity, this unit is conveniently towed directly behind the baler and utilizes an articulated chute to guide bales directly off your existing baler. The unit is powered by either the remote hydraulics on the tractor or by an optional power unit.

5250T.png

Features

PinsV2_0090.jpg

Greaseless Nitrided Pins and Composite Bushings

To improve reliability and to help make servicing a Bale Baron easier, all pivot points now use greaseless and nitride treated pins as well as composite bushings.

Cylinder 2_0037.jpg

Redesigned Cushion Cylinders

The cushion cylinders have been redesigned for extended life and improved reliability.

Wheels0036.jpg

Wider Stance

To improve the stability of the Bale Baron, the wheel base has been widened.

wide-euro-tires.jpg

Wide Euro Style Tires

Wide 19/45-17 10 ply tires are standard on the rear axle. These wider tires offer increased traction and better flotation in muck soil or wet conditions.

twinebox.jpg

Swing Out Twine Cabinet

Gain full service access to the main components of the Bale Baron with a convenient swing out twine cabinet and shield. A simply release latch allows you to swing the twine cabinet open, no tools required.

gas-shock-mounted.jpg

Gas Shock Mounted Access Panels

For easier servicing, most panels are now gas shock mounted.

largetwinecab.jpg

Large Twine Cabinets

Storage for 16 balls of twine means you can bundle more than 5000 small square bales before needing to refill the cabinets. Plastic twine is one of the most efficient binding options available. Plastic twine is easy to buy, cost effective and user friendly for producer and end user.

knotter.jpg

Rasspe Knotter

The Bale Baron uses the proven low maintenance Rasspe knotter for reliability and easy serviceability. Sealed knotter components keep dirt out and grease in, requiring grease only once a year. Missed ties have an audible alarm.

spring-assist.jpg

Spring Assist Roller Ramp

Once tied, each bundle exits the Bale Baron down the roller ramp and gently onto the ground. The roller ramp is equipped with a compression spring to assist the operator when pinning up the ramp. Add a roller chute extension for stationary baling.

turn table.jpg

Turn Table

The aggressive traction of the Bale Barons perforated turn-table grabs the bales as they exit the baler giving excellent side hill performance.

dual-caster-wheels.jpg

Dual Caster Wheels

Two dual heavy-duty front caster wheels for increased stability and flotation. Hollow rubber block suspension on casters for smooth trailing.

smart-solve.jpg

Smart Solve

The Smart/Solve system runs using a PLC that constantly monitors and warns the operator when needed. Smart/Solve provides user friendly command and alarm messages for the operator.

European Bale Baron Brakes.JPG

Air and Hydraulic Brakes

In Europe, all 4250 and 5250 models come standard with your choice of air or hydraulic brakes. A manual parking brake is also included. Not available with tandem rear axle.

Options

COMAPRISON.jpg

Hydraulic Tongue

For narrow roadways, the hydraulic tongue positions the Bale Baron inline with the tractor and baler. The tongue mechanically unlocks and automatically locks to prevent movement both in road mode and field mode. *EU models only.

Specifications

Scroll / swipe to see full table.

MODEL5250T Image4250T Image
Isobus CompatibleStandard
Greaseless Pins & Composite BushingsStandard
Trails Behind BalerYes
Surge BrakesNot available in Europe
Air BrakesIn Europe, choose standard Air or Hydraulic Brakes
Hydraulic BrakesIn Europe, choose standard Air or Hydraulic Brakes
Bale Size:
14"x18" Bale - 21 Bale Bundle
16"x18" Bale - 18 Bale Bundle
Standard
Closed Center Hydraulic SystemStandard
Load Sensing SystemStandard
Open Center Hydraulic SystemOptional
Hydraulic Oil CoolerStandard with Power Units, otherwise N/A
Horsepower Minimum120 hp
Hydraulic Flow Minimum95 lpm
Hydraulic Flow Recommended113-170 lpm
Max Permissible Hydraulic Flow170 lpm
Remote SCV Required0 Sets
Power Beyond with Load SensingRequired when using Tractor Hydraulics Not required with Power Units
Diesel Powered Hydraulic Power UnitOptional
30 gpm PTO Powered UnitN/A
40 gpm PTO Powered UnitN/A
3PH mounted 30 gpm PTO Power UnitN/A
3PH mounted 40 gpm PTO Power UnitOptional
Base Weight5300 kg
Weight with PTO Pump KitN/A
Weight with Engine Power Unit5760 kg
Capacity1000 bales/hr @ 150 lpm 800 bales/hr @ 113 lpm
600 bales/hr @ 95 lpm
400 bales/hr @ 80 lpm
Overall Length770 cm
Rear Tandem Axle318 cm
Front Offset SwivelOptional
Width with 15" Standard TiresN/A
Width with 19" Wide Flotation Tires264 cm
Width with 19" Wide Flotation Tires264 cm
Height (Railings Collapsed)323 cm
Height (Railings Raised)343 cm

Ready to Know More?

Similar Products