Pull Type - Behind TractorOptional Receiving Platform Req’dOptional Receiving Platform Req’d
Surge BrakesOptionalOptional
Closed Center Hydraulic SystemStandardStandard
Open Center Hydraulic SystemOptionalOptional
Load Sensing SystemStandardStandard
Diesel Powered Hydraulic Power UnitOptionalOptional
30 GPM PTO Powered UnitOptionalOptional
40 GPM PTO Powered UnitN/AOptional
Hydraulic Oil CoolerStandard with Power UnitsStandard with Power Units
14"x18" Bale - 21 Bale Bundle
16"x18" Bale - 18 Bale Bundle
Capacity400/hr. at 20 gpm (75 lpm)
600/hr. at 25 gpm (95 lpm)
800/hr. at 30 gpm (113 lpm)
1000 / hr at 40 gpm (150 lpm)
Horsepower Requirement100 hp minimum120 hp minimum
Hydraulic Flow Requirement20 gpm (75 lpm) minimum
25 gpm (95 lpm) plus
Up to 45 gpm (170 lpm)
Max. Permissible Hydraulic Flow30 gpm (113 lpm)45 gpm (170 lpm)
Load Sensing Power beyond CouplerRequired on tractorRequired on tractor
Remote SCV Required2 sets2 sets
Shipping Weight11,250 lbs (5100 kg)11,375 lbs (5160 kg)
Width with Standard Tires98 in (250 cm)98 in (250 cm)
Width with Wide Flotation Tires104 in (264 cm)104 in (264 cm)
Overall Length392” (996 cm)392" (996 cm)
Wheelbase Length125" (318 cm)125" (318 cm)
Height127" (323 cm)127" (323 cm)


Hydraulic Valve Block with ReGen Valve

The RegenValve is a TURBO for your hydraulics. By way of the plunger circuit the RegenValve increases the speed of the plunger.

Central Lube Block

Service 16 grease points of the plunger all at once with the valve and hose system of the Central Lube Block. A network of hoses reach 16 grease points giving you consistently even application from one central location.

Large Twine Cabinets

Plastic twine is one of the most efficient binding options available. Plastic twine is easy to buy, cost effective and user friendly for producer and end user. The Bale Baron twine cabinet holds 16 balls of twine, enough for 640 bundles or 13,000 small square bales.

Rasspe Knotter

The Bale Baron uses the proven low maintenance Rasspe knotter for reliability and easy serviceability. Sealed knotter components keep dirt out and grease in, requiring grease only once a year. Missed ties have an audible alarm.

Spring Assist Roller Ramp

Once tied, each bundle exits the Bale Baron down the roller ramp and gently onto the ground. The roller ramp is equipped with a compression spring to assist the operator when pinning up the ramp. Add a roller chute extension for stationary baling.

Turn Table

The aggressive traction of the Bale Barons perforated turn-table grabs the bales as they exit the baler giving excellent side hill performance.

Dual Caster Wheels

Two dual heavy-duty front caster wheels for increased stability and flotation. Hollow rubber block suspension on casters for smooth trailing.

Road Ready

Built-in signal lights and reflective side detailing for farm to farm road or highway trailering.

Smart Solve

The Smart/Solve system runs using a PLC that constantly monitors and warns the operator when needed. Smart/Solve provides user friendly command and alarm messages for the operator.


PTO Pump Kit

The PTO Power Units are designed to make the most of the equipment you have. By transforming PTO power into hydraulic power this unit allows older tractors to be used to run the Bale Baron that may not have the hydraulic capacity but have the horsepower to do the job. The PTO power units are equipped with a variable displacement piston pump with load sensing, a 30 gallon reservoir, and an oil cooler. The PTO power units utilize high performance CV joints. The 30 GPM PTO has a capacity of 800 bales/hr and keeps up with two balers. The 40 GPM PTO has a capacity of 1000 bales/hr and will keep up with two - three balers.

Diesel Hydraulic Power Unit

42 h.p Kubota turbo diesel c/w 30g.p.m. Hydraulic, torque limiting, load sensing pump. Rotary screen pre-cleaner keeps radiator clear of chaff. No hydraulic remotes required for 4240T, 2 set of hydraulic remotes required for 4240P.

Telescoping Endgates

This kit allows you to choose the standard 21Pack, 18Pack or 9Pack bundle. The kit consists of telescoping endgates which change from 21Pack to 18Pack or 9Pack with the pull of a pin. Hydraulic expeller rollers are needed to move the 9Pack onto the roller ramp and are recommended for the 18Pack bundle.

Wide Euro Style Tires

Optional 19/45-17 10 ply tires are available on the rear axle. These wider tires offer increased traction and better flotation in muck soil or wet conditions.