TRAIL BEHIND MODEL

The tractor assisted Bale Baron 4250T trail behind model is the original concept and has remained a popular choice as a one pass system especially suited to smaller acreages. This unit is conveniently towed directly behind the baler and utilizes an articulated chute to guide bales directly off your existing baler. The unit is powered by either the remote hydraulics on the tractor or by an optional power unit.

4250T.png

Features

isobus.jpg

ISOBUS Connectivity

The Bale Baron 4250 Series is now fully ISOBUS compatible, giving the operator full control and visibility over the bundling process, right from the cab. Watch each bundle build as every bale is tracked and counted - both in auto and manual modes - for accuracy every time. The Bale Baron will work with and without ISOBUS. If your tractor does not have an ISOBUS display, an optional display is available. The Bale Baron will also work without ISOBUS using the standard in-cab control.

PinsV2_0090.jpg

Greaseless Nitrided Pins and Composite Bushings

To improve reliability and to help make servicing a Bale Baron easier, all pivot points now use greaseless and nitride treated pins as well as composite bushings

Wheels0036.jpg

Wider Stance

To improve the stability of the Bale Baron, the wheel base has been widened.

largetwinecab.jpg

Large Twine Cabinets

Storage for 16 balls of twine means you can bundle more than 5000 small square bales before needing to refill the cabinets. Plastic twine is one of the most efficient binding options available. Plastic twine is easy to buy, cost effective and user friendly for producer and end user.

rasp-knotter-02.jpg

Rasspe Knotter

The Bale Baron uses the proven low maintenance Rasspe knotter for reliability and easy serviceability. Sealed knotter components keep dirt out and grease in, requiring grease only once a year. Missed ties have an audible alarm.

spring-assist.jpg

Spring Assist Roller Ramp

Once tied, each bundle exits the Bale Baron down the roller ramp and gently onto the ground. The roller ramp is equipped with a compression spring to assist the operator when pinning up the ramp. Add a roller chute extension for stationary baling.

turntable.jpg

Turn Table

The aggressive traction of the Bale Barons perforated turn-table grabs the bales as they exit the baler giving excellent side hill performance.

dual-caster-wheels.jpg

Dual Caster Wheels

Two dual heavy-duty front caster wheels for increased stability and flotation. Hollow rubber block suspension on casters for smooth trailing.

smart-solve.jpg

Smart Solve

The Smart/Solve system runs using a PLC that constantly monitors and warns the operator when needed. Smart/Solve provides user friendly command and alarm messages for the operator.

brakes.jpg

Air and Hydraulic Brakes

Air brakes and hydraulic brakes are optional on all 4250 and 5250 models. A manual parking brake is also included. Not available with tandem rear axle.

Options

isobus-display.jpg

ISOBUS Display Unit

If your tractor does not have ISOBUS, Marcrest offers an ISOBUS display unit.

3phPtoPowerUnite.jpg

3 Point Hitch Mounted PTO Power Unit

The 3 Point Hitch Mounted PTO Power Unit is designed to be used in conjunction with a baler and trailed Bale Baron. This unit allows older tractors to be used to run the Bale Baron that may not have the hydraulic capacity but have the horsepower to do the job.

telescoping_endgates.jpg

Telescoping Endgates

This kit allows you to choose the standard 21Pack, 18Pack or 9Pack bundle. The kit consists of telescoping endgates which change from 21Pack to 18Pack or 9Pack with the pull of a pin. Hydraulic expeller rollers are needed to move the 9Pack onto the roller ramp and are recommended for the 18Pack bundle.

wide-euro-tires.jpg

Wide Euro Style Tires

Optional 19/45-17 10 ply tires are available on the rear axle. These wider tires offer increased traction and better flotation in muck soil or wet conditions.

Specifications

Scroll / swipe to see full table.

MODEL5250T Image4250T Image
Isobus CompatibleStandard
Greaseless Pins & Composite BushingsStandard
Trails Behind BalerYes
Surge BrakesStandard
Air BrakesOptional
Hydraulic BrakesOptional
Bale Size: 14"x18" Bale - 21 Bale Bundle
16"x18" Bale - 18 Bale Bundle
Standard
Closed Center Hydraulic SystemStandard
Load Sensing SystemStandard
Hydraulic Oil CoolerStandard with Power Units, otherwise N/A
Open Center Hydraulic SystemOptional
Horsepower Minimum100 hp
Hydraulic Flow Minimum95-113 lpm (20-30 gpm)
Hydraulic Flow Recommended80 lpm (20 gpm)
Max Permissible Hydraulic Flow113 lpm (30 gpm)
Power Beyond with Load SensingRequired when using Tractor Hydraulics
Not required with Power Units
Remote SCV Required0 sets
Diesel Powered Hydraulic Power UnitN/A
30 gpm PTO Powered UnitN/A
40 gpm PTO Powered UnitN/A
3PH mounted 30 gpm PTO Power UnitOptional
3PH mounted 40 gpm PTO Power UnitN/A
Base Weight4700 kg
Capacity800 bales/hr @ 113 lpm (30 gpm)
600 bales/hr @ 95 lpm (25 gpm)
400 bales/hr @ 80 lpm (20 gpm)
Overall Length770 cm
Wheelbase Length318 cm
Rear Tandem Axle
Front Offset Swivel
Width with 15" Standard Tires250 cm
Width with 19" Wide Flotation Tires264 cm
Height (railings Collapsed)323 cm
Height (Railings Raised)343 cm

Ready to Know More?

Similar Products