TRAIL BEHIND MODEL

The tractor assisted Bale Baron 4250T trail behind model is the original concept and has remained a popular choice as a one pass system especially suited to smaller acreages. This unit is conveniently towed directly behind the baler and utilizes an articulated chute to guide bales directly off your existing baler. The unit is powered by either the remote hydraulics on the tractor or by an optional power unit.

Specifications

MODEL
Isobus Compatible	Standard
Greaseless Pins & Composite Bushings	Standard
Trails Behind Baler	Yes
Surge Brakes	Standard (Not available in Europe)
Air Brakes	Optional (In Europe, choose standard Air or Hydraulic Brakes)
Hydraulic Brakes	Optional (In Europe, choose standard Air or Hydraulic Brakes)
Bale Size: 14"x18" Bale - 21 Bale Bundle 16"x18" Bale - 18 Bale Bundle	Standard
Closed Center Hydraulic System	Standard
Load Sensing System	Standard
Hydraulic Oil Cooler	Standard with Power Units, otherwise N/A
Open Center Hydraulic System	Optional
Horsepower Minimum	100 hp
Hydraulic Flow Minimum	20-30 gpm (95-113 lpm)
Hydraulic Flow Recommended	20 gpm (80 lpm)
Max Permissible Hydraulic Flow	30 gpm (113 lpm)
Power Beyond with Load Sensing	Required when using Tractor Hydraulics Not required with Power Units
Remote SCV Required	0 sets
Diesel Powered Hydraulic Power Unit	N/A
30 gpm PTO Powered Unit	N/A
40 gpm PTO Powered Unit	N/A
3PH mounted 30 gpm PTO Power Unit	Optional
3PH mounted 40 gpm PTO Power Unit	N/A
Base Weight	10,500 lbs (4700 kg)
Capacity	800 bales/hr @ 30 gpm (113 lpm) 600 bales/hr @ 25 gpm (95 lpm) 400 bales/hr @ 20 gpm (80 lpm)
Overall Length	330" (770 cm)
Wheelbase Length	125" (318 cm)
Rear Tandem Axle	Optional
Front Offset Swivel	Optional
Width with 15" Standard Tires	98" (250 cm)
Width with 19" Wide Flotation Tires	104" (264 cm)
Height (railings Collapsed)	127" (323 cm)
Height (Railings Raised)	135" (343 cm)

Features

ISOBUS Connectivity

The Bale Baron 4250 Series is now fully ISOBUS compatible, giving the operator full control and visibility over the bundling process, right from the cab. Watch each bundle build as every bale is tracked and counted - both in auto and manual modes - for accuracy every time. The Bale Baron will work with and without ISOBUS. If your tractor does not have an ISOBUS display, an optional display is available. The Bale Baron will also work without ISOBUS using the standard in-cab control.

Greaseless Nitrided Pins and Composite Bushings

To improve reliability and to help make servicing a Bale Baron easier, all pivot points now use greaseless and nitride treated pins as well as composite bushings

Wider Stance

To improve the stability of the Bale Baron, the wheel base has been widened.

Large Twine Cabinets

Storage for 16 balls of twine means you can bundle more than 5000 small square bales before needing to refill the cabinets. Plastic twine is one of the most efficient binding options available. Plastic twine is easy to buy, cost effective and user friendly for producer and end user.

Rasspe Knotter

The Bale Baron uses the proven low maintenance Rasspe knotter for reliability and easy serviceability. Sealed knotter components keep dirt out and grease in, requiring grease only once a year. Missed ties have an audible alarm.

Spring Assist Roller Ramp

Once tied, each bundle exits the Bale Baron down the roller ramp and gently onto the ground. The roller ramp is equipped with a compression spring to assist the operator when pinning up the ramp. Add a roller chute extension for stationary baling.

Turn Table

The aggressive traction of the Bale Barons perforated turn-table grabs the bales as they exit the baler giving excellent side hill performance.

Dual Caster Wheels

Two dual heavy-duty front caster wheels for increased stability and flotation. Hollow rubber block suspension on casters for smooth trailing.

Smart Solve

The Smart/Solve system runs using a PLC that constantly monitors and warns the operator when needed. Smart/Solve provides user friendly command and alarm messages for the operator.

Air and Hydraulic Brakes

Air brakes and hydraulic brakes are optional on all 4250 and 5250 models.

In Europe, all 4250 and 5250 models come standard with your choice of air or hydraulic brakes. A manual parking brake is also included.

Options

ISOBUS Display Unit - Optional Add On

If your tractor does not have ISOBUS, Marcrest offers an ISOBUS display unit.

3 Point Hitch Mounted PTO Power Unit - Optional Add On

The 3 Point Hitch Mounted PTO Power Unit is designed to be used in conjunction with a baler and trailed Bale Baron. This unit allows older tractors to be used to run the Bale Baron that may not have the hydraulic capacity but have the horsepower to do the job.

Telescoping Endgates - Optional Add On

This kit allows you to choose the standard 21Pack, 18Pack or 9Pack bundle. The kit consists of telescoping endgates which change from 21Pack to 18Pack or 9Pack with the pull of a pin. Hydraulic expeller rollers are needed to move the 9Pack onto the roller ramp and are recommended for the 18Pack bundle.

Wide Euro Style Tires - Optional Add On

Optional 19/45-17 10 ply tires are available on the rear axle. These wider tires offer increased traction and better flotation in muck soil or wet conditions.

Stationary Roller Extensions - Optional Add On

Get the most out of your stationary operation with roller extensions that pin directly to the roller chute on the Bale Baron. The sealed bearing, steel rollers gently guide each bundle away from the Bale Baron and stop level for easy handling with a grapple.

Expeller Roller - Optional Add On

The hydraulically powered expeller roller with steel fingers moves the bundle out of the way before the endgates close.The expeller roller replaces the first roller at the top of the roller chute. For use in a stationary operation or with a 18Pack/9Pack kit.

Hydraulic Swing Hitch - Optional Add On

For narrow roadways, the hydraulic tongue positions the Bale Baron inline with the tractor and baler. The tongue mechanically unlocks and automatically locks to prevent movement both in road mode and field mode. *Only available with air or hydraulic brakes.

Rear Tandem Axle

Designed for the smoothest Bale Baron ride yet, even at higher speeds over rough fields and tracks. Also safer and smoother for road travel, the Baron stays directly in line behind the tractor, with no sway or swing.

Front Offset Swivel

Primarily designed for crossing pivot irrigation tracks, Front Offset Swivel wheels provide for a smoother ride over rough fields.

Bundle Flipper

Designed for the operator who handles the Bale Baron bundles with a bale spear and transports the bundles flipped over on their side. This option flips over the bundles in the field as they exit the Bale Baron.